Your are here: Home > Showroom > Bench Lathe

Bench Lathe

Bench Lathe
Model No. C0632A TOP
Origin: China
Min. Order: Negotiable
﹣This machine tool can assume all kinds of turning works, it can turnings many kinds of the metric threads, the inch threads, the modutus pitches, the diametrical pitches which are in commen use, and it can bore, heaming, scraping oilcan.
﹣This tool is used of high intensity of cast iron, the surface of guideway has been quenched with high frequency, then it has been elaborate milling. It has high precision and long life.
﹣The gears of the headstock have been quenched with high frequency and elaborate milling, theyhave high precision and low noises.
Main specifications
Model C0632Ax750 C0632Ax1000 C0636Ax750 C0636Ax1000
Swing over bed 330mm 360mm
Swing over cross slide 198mm 212mm
Swing in gap diameter 476mm 491mm
Swing in length 210mm 210mm
Center height 166mm 166mm
Admits between 750mm 1000mm 750mm 1000mm
Bed width 187mm 187mm
Bed length 1248mm 1655mm 1363mm 1655mm
Bed height 290mm 290mm
Spindle bore 38mm 38mm
Spindle nose D1-4” or A2-4” D1-4” or A2-4”
Taper in nose No. 5 morse No. 5 morse
Taper in sleeve No. 3 morse No. 3 morse
Speeds number 8 or 16 (pole changeable motor)
(optional)
8 or 16 (pole changeable motor)
(optional)
Speeds range 70-2000rpm or 35-2000rpm
(2 speed motor)
70-2000rpm or 35-2000rpm
(2 speed motor)
Cross slide width 118mm 118mm
Cross slide travel 160mm 118mm
Compound rest width 76mm 76mm
Compound rest travel 68mm 68mm
Lead screw diameter 22mm 22mm
Lead screw thread 8 TPI or 3 mm pitch 8 TPI or 3 mm pitch
Feed rod diameter 19mm 19mm
Cutting tool max section 16x16mm 16x16mm
Threads imperial pitches 36 Nos. 8-112 TPI
or (34 Nos. 456 TPI)
36 Nos. 8-112 TPI or
(34 Nos. 456 TPI)
Threads metric pitches 28 Nos. 0.2-5mm pitch or
(26 Nos. 0.4-7mm pitch)
28 Nos. 0.2-5mm pitch or
(26 Nos. 0.4-7mm pitch)
Threads diametral pitches 36 Nos. 8-112 D.P 36 Nos. 8-112 D.P
Threads module pitches 22 Nos. 0.2-3 M.P. 22 Nos. 0.2-3 M.P.
Longitudinal feeds imperial 36 Nos.0.0019~0.0273”/Rev. or
(32 Nos. 0.002~0.548”/Rev)
36 Nos.0.0019~0.0273”/Rev. or
(32 Nos. 0.002~0.548”/Rev)
Longitudinal feeds metric 36 Nos.0.050~0.696mm/Rev.
or (32 Nos. 0.052~1.392mm/Rev)
36 Nos.0.050~0.696mm/Rev.
or (32 Nos. 0.052~1.392mm/Rev)
Cross feeds imperial 36 Nos.0.0006~0.0094”/Rev.
or (32 Nos. 0.0007~0.0187”/Rev)
36 Nos.0.0006~0.0094”/Rev.
or (32 Nos. 0.0007~0.0187”/Rev)
Cross feeds metric 36 Nos.0.013~0.188mm/Rev.
or (32 Nos. 0.014~0.380mm/Rev)
36 Nos.0.013~0.188mm/Rev.
or (32 Nos. 0.014~0.380mm/Rev)
Quill diameter or optional 32mm 32mm
Quill travel or optional 100mm 100mm
Quill taper or optional No. 3 morse No. 3 morse
Set over 10mm 10mm
For main motor 2HP, 3PH or 2HP, 1PH 2HP, 3PH or 2HP, 1PH
 
Copyright © 2009 Xinyu Machinery Co., Ltd.
Add.: No.10, Huan Cheng Bei Er Lu,Seven Star district,Guilin, China   E-mail: pngbu@163.com
Tel: 0086-773-5609507 Fax: 0086-773-5606863